The HY11 power pack is the most complete of our production range because it uses the H01 body prepared with a cavity number higher than H00.
This means greater versatility offered by the different configurations obtainable. It can be used for simple effect and double effect circuits thanks to its expandability through cartridges integrated in the body or interface blocks in our catalogue or available on request according to project requirements.
Actuation of the circuit is controlled by manual directional valves, or electrically or hydraulically piloted.
Documentation
The valve mounting cavities are machined according to the SAE standard 8 or ¾" 16 UNF, while the connecting doors are threaded 1/4" BSP. On request, threads are available in Ø3/8” and in SAE/NPT format.
One-way pumps can be used with G. 0 or G. 1 from 0.25 cc/rev to 9.8 cc/rev, both standard and helical gears up to a maximum pressure of 350 bar.
On request, manual emergency pumps can be integrated.
The production range of our tanks includes the plastic, steel and aluminium versions with a volume of 1 L and 60 L.
It is possible to supply custom tanks.
DC motors (brushes, permanent magnets, brushless) and AC from 12V to 400V with powers between 0.25 KW up to 4 KW with intermittent service and continuous service. The H01 manifold is designed for direct mounting of AC B5 motors with square flange.
| Type | Displacement cm³/rev. |
P2 Int. working pressure to bar |
Tanks litres* |
|---|---|---|---|
| HY10 | 0.25 - 9.8 | 350 | gen-60 |
| Motor powers D.C. - 12V* kW |
Motor powers D.C. - 24V* kW |
Motor powers D.C. - 48V* kW |
Motor powers A.C. 220/380V* kW |
|---|---|---|---|
| 0.5 - 2.5 | 0.5 - 3.5 | 0.8 - 3.5 | 0.25 - 4.0 |
* Other versions on request
| POSITION | DESCRIPTION | POSITION | DESCRIPTION | |||
|---|---|---|---|---|---|---|
| 1 | Motor AC 230/400V 50 Hz4p vent. with S.F. | 11 | Guided pressure relief valve | |||
| 2 | Joint for AC motor S.F.– pump g.1 | 12 | Valve cavity closure cap PA0406 F. 1/4" G | |||
| 3 | Motor DC 24V-2000W ø112 vent. with contactor | 13 | Valve cavity closure cap PA0077 | |||
| 4 | Joint for DC motor ø112 and pump g.1 | 14 | Valve cavity closure cap PA0078 | |||
| 5 | Iron tank 30 l cylindrical horizontal | 15 | Mini-socket 1/4"G + metal hood | |||
| 6 | Standard PS1 gear pump | 16 | Spacer block 19.5 mm | |||
| 7 | L curve 90° M.M. 3/8” G | 17 | Modular block with filtering on T | |||
| 8 | Std suction filter F. 3/8” G | 18 | Parallel conn. side doors modular block 3/8”G | |||
| 9 | H01 standard body | 19 | Cetop 3 solenoid valve 4/3 | |||
| 10 | Check valve ST321 for H01 body | 20 | AC connector straight. 250V-2A for RAC coils |