The HY10 power pack represents the perfect combination between compactness and performance.
It can be used for simple effect and double effect circuits thanks to its expandability through interface blocks in our catalogue or available on request according to project requirements.
Actuation of the circuit is controlled by manual directional valves, or electrically or hydraulically actuated.
The bodies used in the HY10 range of power packs are designed and manufactured internally and are divided into three types:
- H00 for single and/or double effect circuits.
- H0A for double effect circuits with electro-distributor cartridge screwed into the manifold.
- H0B for double effect circuits such as the H0A, however with built-in check valve.
Documentation
The valve mounting cavities are machined according to the SAE standard 8 or ¾" 16 UNF, while the connecting doors are threaded 1/4" BSP. On request, threads are available in Ø3/8” and in SAE/NPT format.
One-way pumps can be used with G. 0 or G. 1 from 0.25 cc/rev to 9.8 cc/rev, both standard and helical gears up to a maximum pressure of 350 bar.
On request, manual emergency pumps can be integrated.
The production range of our tanks includes the plastic, steel and aluminium versions with a volume of 1 L and 60 L.
It is possible to supply custom tanks.
DC motors (brushes, permanent magnets, brushless) and AC from 12V to 400V with powers between 0.25 KW up to 4 KW with intermittent and continuous service.
| Type | Displacement cm³/rev. |
P2 Int. working pressure to bar |
Tanks litres* |
|---|---|---|---|
| HY10 | 0.25 - 9.8 | 350 | gen-60 |
| Motor powers D.C. - 12V* kW |
Motor powers D.C. - 24V* kW |
Motor powers D.C. - 48V* kW |
Motor powers A.C. 220/380V* kW |
|---|---|---|---|
| 0.5 - 2.5 | 0.5 - 3.5 | 0.8 - 3.5 | 0.25 - 4.0 |
* Other versions on request
| POSITION | DESCRIPTION | POSIZIONE | DESCRIZIONE | |||
|---|---|---|---|---|---|---|
| 1 | Motor AC B14 230/400V 50-60Hz 4p | 13 | L curve 90° M.M. 3/8” G | |||
| 2 | Adaptor flange for AC motor | 14 | Std suction filter F. 3/8” G | |||
| 3 | Semi-joint AC motor side | 15 | H00 standard body | |||
| 4 | Semi-joint g.1 pump side | 16 | Guided pressure maximum valve | |||
| 5 | DC motor 12V-1600W ø114 with contactor | 17 | Valve cavity closure cap PA0078 | |||
| 6 | Joint for DC motor ø114 with contactor | 18 | One-way valve coup. 1/4”G | |||
| 7 | Plastic protection kit for motors ø114 | 19 | Excluder tap for 90° gauge coupling | |||
| 8 | Drive kit for pulley assembly | 20 | ABS gauge ø63 coupling 1/4”G | |||
| 9 | LH drive joint | 21 | Spacer block 19.5 mm | |||
| 10 | Pulley | 22 | Parallel conn. side doors modular block 1/4”G | |||
| 11 | Iron tank 8 l cylindrical S.F. horizontal | 23 | Cetop 3 solenoid valve 4/3 | |||
| 12 | PS1 standard gear pump | 24 | Std ISO 2-pole connector + G |